Water Damage Cleanup Process After a Flood 

In this article, learn how to tackle water damage repair and clean-up process like a pro and what to expect throughout the process. 

Water Damage Cleanup

If you have experienced a flood damage in Troy lately or pipe breakage in your home. You need to act right away. Look for the switch of your water supply then shut it off. If you don’t know what to do kindly call a plumber or any water damage repair or restoration provider. It will be the best idea to call the pros for the cleanup as the earliest way possible to avoid further damage. 

How to Restore a Home After a Water Damage 

There are variety of factors in restoration of all water damage. It varies according to the amount of area damaged and how long the presence of the water in the area. If the water damage restoration services arrived, they can start to inspect the range of damage, the timeline of the repair and the cost of all the expenses in restoration. Here are the things that take place while the restoration of the water damage is ongoing. 

INSPECTION 

The first thing that should be done by the water damage repair personnel is to check the perimeter of the damage. Look for the leakage, the breaks and the soft spots. They will put their special tools in the affected area to know the accurate measurements of the humidity of the home. They have all the instruments, ability and trainings to check the extent of the damage. 

STOPPING FROM FURTHER DAMAGE 

If we do not treat the water damage right away, most likely, the damage will get worse. We need to dry up using the drying equipment in order to prevent the growth of molds and mildews. The presence of the dryer is needed as long as the area is still wet. The timeline will depend according to the assessment of the water damage repair personnel. 

REMOVAL OF STANDING WATER 

It is the most important step in restoring the home from water damage. The removal of standing water using the vacuums of the contractor are one of the great ideas because it will suck up the water in the area. 

DRYING 

After the standing waters are removed, it’s the right time to dry out the area. The contractor has all the means and different types of dryers to absorb the moisture. They will use fans to circulate in the area. The process of drying up will takes time but of all the method this is the easiest rather than to rebuild and demolish the area which is most costly. 

CONTAINMENT 

Containment and drying process happens in sync. While drying is ongoing, the areas that are still wet is needed to be taped off in order to identify with the areas are already dry. Work crew will exert a lot of effort in maintaining the area to make it dry as fast as possible. 

MONITORING 

Throughout the drying process, the crew will monitor the progress of the drying. They will measure the moisture and the humidity in the rooms. 

COMPLETION 

In this phase, once the area is dry, it will be considered as a complete work. The drying equipment will be pulled out once the work is finished. This will serve as your guide throughout the cleanup process. 

Leave a Reply

Your email address will not be published. Required fields are marked *